Clearance Fuel Injector Clinic 1200cc (130lbs) Injectors, Set of 8 :: 2014-2019 Corvette, 2016-2019 Cadillac CTS-V & 2016-2024 Camaro SS & ZL1

Details:Cylinder Quantity: 8Impedance: High-ZFuel Type: Gasoline, E85, Ethanol/MethanolInjector Height: 64mmTop/Bottom O-Ring: 14mmFeatures:These injectors utilize the latest technology and provide great linearity and short pulse width repeatability.Injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set.Flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.Superior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.Injectors are set up to and include all O-rings needed to fit the factory application.Max Wheel HP Rating at 90% Duty CycleNA / Gas, 43.5psi1399 HPNA / Gas, 58psi1615 HPNA / E85, 43.5psi1076 HPNA / E85, 58psi1243 HPSupercharged / Gas, 43.5psi1272 HPSupercharged / Gas, 58psi1469 HPSupercharged / E85, 43.5psi978 HPSupercharged / E85, 58psi1130 HPTurbo / Gas, 43.5psi1165 HPTurbo / Gas, 58psi1346 HPTurbo / E85, 43.5psi897 HPTurbo / E85, 58psi1035 HPFuel Injector Clinic Injector Set: 8x1200cc/min (110lbs/hr) at 3 bar (43.5psi) fuel pressure and 130lbs/hr (1350cc/min) at OE 58psi (4 bar) fuel pressure. Saturated / High Impedance Injectors.This injector set is precisely matched using Fuel Injector Clinic’s proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today.This injector set contains high impedance injectors matched to the saturated injector signal generated by the vehicle’s OEM ECU, OR is suitable for use with an aftermarket ECU made or set up for high impedance injectors.Note: In order to be conservative, Fuel Injector Clinic recommends a maximum duty cycle of 90%Part Number: IS300-1200H