Deal BTR PDS Stage 4 Camshaft V2, 229/25X :: 2010-2015 Camaro SS

Features:Positive Displacement Supercharger (PDS) Stage 4Hydraulic RollerGear Attachement: 3-BoltUsage: Street/Performance/TrackValve Springs Required: YesMaximum Horsepower and TorqueAggressive Idle CharacterEnhanced Mid-Range and Top-End PowerBillet Steel ConstructionCam Specs:Intake Duration @ .050″ Lift: 229Exhaust Duration @ .050″ Lift: 25XIntake Valve Lift w/Factory Rocker Arm Ratio: 0.636″Exahust Valve Lift w/Factory Rocker Arm Ratio: 0.636″Lobe Separation (degrees): 116The BTR LS3 PDS Stage 4 camshaft (PDSSTAGE4) is engineered for GM Gen IV 6.2L LS3 engines equipped with Positive Displacement Superchargers, delivering extreme horsepower and torque for street, track, and high-performance builds. This aggressive Stage 4 profile provides maximum airflow, optimized mid-range and top-end power, and a strong, aggressive idle for supercharged LS3 engines. Developed in-house with advanced BTR lobe technology and validated on Spintron and engine dynos, the cam ensures reliable valvetrain stability, durability, and repeatable performance when paired with proper supporting modifications and tuning.Note: The use of BTR dual or conical spring kits is required due to high valve lift and increased rpm potential.Note: Hardened pushrods are recommended in supercharged or power-adder applications.Note: To use this cam in an L99 engine you will need the L99 to LS3 conversion kit to properly operate this cam in the L99 engine. A torque converter will also be necessary to prevent any surging once the cam is installed.Note: When used in higher compression applications, E85 fuel is recommended.Emissions Disclaimer: This product is NOT CARB legal and CAN NOT ship to California.Part Number: PDSSTAGE4