Free Shipping Mishimoto Performance Intercooler Kit, Black :: 2016-2023 Camaro 2.0T

Features: 2″ Thick Intercooler Design Optimized for Maximum Airflow with Minimal Pressure Drop 45% Increase in Internal Core Volume 239% Increase in External Fin Surface Area 78% Increase in Core Size Cast End Tanks with Internal Air Diverter Provide Optimal Airflow Through Intercooler 30% Greater Internal Volume than Stock 10% Increase in Flow Utilizes Stock Quick-Disconnect Fittings for Easy Installation Pre-Welded NPT Port on Cold-Side Pipe Allows for Quick Install of Aftermarket Parts Wrinkle Black Piping Finish Mishimoto Lifetime Warranty     It’s time to give the intercooling system in your 2016+ Chevrolet Camaro 2.0T a complete overhaul with the Mishimoto Performance Intercooler Kit. The bar-and-plate constructed core picks up the slack for the stock unit by offering increased heat rejection characteristics, as well as a boost in airflow. On top of the new construction, the design increases the internal core volume by 45%, and offers a whopping 239% gain in external fin surface area, making sure that the charged air running through your LTG is as chilled as possible.     The kit includes a set of our mandrel-bent intercooler piping featuring a range of 2.25-2.75″ diameters equating in a 30% increase in volume and 10% better flow of the charged air. All together, the piping kit gets your LTG powered Camaro up to 11 additional horsepower and 9 ft-lbs of torque. Also included, a pre-welded NPT port on the cold side piping that not only allows for easy installation of your stock equipment, but also adding an aftermarket boost gauge or meth-injection is a breeze. The Mishimoto Performance Intercooler Kit for your 2016+ Camaro is available in wrinkle black piping, and as always, this kit is covered under the Mishimoto Lifetime Warranty.     Includes: (1) Aluminum Intercooler (2) Aluminum Pipes w/ CNC-machined quick-disconnects (1) Aluminum Pipe w/ CNC-machined 2-bolt flange (2) Quick-Disconnect Spring Clips (1) 2.75″ 90° Silicone Coupler (1) 2.25″ to 2.5″ Silicone Transition Coupler (1) 2.5″ T-Bolt Clamp (1) 2.75″ T-Bolt Clamp (2) 3″ T-Bolt Clamps (3) Tree Clips Mishimoto Lifetime Warranty     Pipe Diameter – 2.25″/2.5″/2.75″ Core Thickness – 2″ Outlet – 2.40″ Inlet – 2.40″ Core Size – 21.65″ x 17.15″ x 2.09″ Max Rec. HP – 450     Note: There is an O-ring inside of the stock intercooler pipe on the end that connects to the intercooler. This O-ring must be removedand installed into your Mishimoto intercooler pipe. Take note when removing it from the stock pipe as the O-ring must be installed in the correct direction. Please reference our installation video for additional information.     Emissions Disclaimer: This product is NOT CARB legal and CAN NOT ship to California.     Installation Videos